Chat with us, powered by LiveChat
GB 0208 704 1807
Electrovault

Over two billion Lithium ion cells are produced every year, but major safety concerns surround battery storage, quarantine procedures, transport/disposal of damaged batteries and thermal runaway. During a thermal runaway, the high heat created by the failing cell can develop to the next cell, causing it to also become thermally unstable. A battery pack can be destroyed within minutes or last for hours as each cell runs away.  An irreversible thermal event in a lithium-ion battery can be initiated in several ways, by spontaneous internal or external short-circuit, overcharging, external heating or fire or even mechanical abuse.

During a thermal runaway hydrogen fluoride HF, phosphorus pentafluoride (PF5) and phosphoryl fluoride (POF3) are released, studies have shown that using water as a fire suppressant may also increase the formation of HF.

Our Electrovault storage units are made to comply with RC61 guidelines for Battery storage and can be tailored to suit your specification, whether that is:

  • Atex Rated Temperature control
  • Atex Rated Humidity Control
  • Atex Rated Gas detection systems
  • Fire Suppression Systems
  • Fire Rated  (including all Atex internal electrical components where required)
  • Atex Lighting
  • Remote monitoring systems
  • FIFO control operations
  • LIFO control operations
  • Fire rated and segregated Quarantine areas
  • Restricted access control
  • Fully automated extraction systems

Trust in our reputation for developing and delivering market-leading products and services for hazardous materials handling.

Improving the level of safety in your workplace is where our work begins. From there, we’ll help you reduce your risk, liability and downtime, and therefore increase productivity. Plus, we’ll take you beyond the legal standards for Health & Safety and Corporate Social Responsibility, with products and services that are also designed to exceed your performance expectations.

Chemical Warehouses

Here at Chemstore we listen to our clients requirements and design bespoke storage solutions to suit your needs.

Our Chemical warehouses are made to comply with HSG71 guidelines and can be tailored to suit your specification needs, whether that is:

  • Temperature control (Cold stores, ambient or hot rooms)
  • Fire Suppression Systems (Gas, Foam, Water or specific compatible media)
  • Fire Rated  (including all Atex internal electrical components where required)
  • Lighting
  • Remote monitoring
  • FIFO control operations
  • LIFO control operations
  • Quarantines areas
  • Restricted access control
  • CCTV
  • Clean room areas
  • Mobile Laboratory systems
  • Fully automated extraction systems
  • Fully bunded segregation of chemicals

Trust in our reputation for developing and delivering market-leading products and services for hazardous materials handling.

Improving the level of safety in your workplace is where our work begins. From there, we’ll help you reduce your risk, liability and downtime, and therefore increase productivity. Plus, we’ll take you beyond the legal standards for Health & Safety and Corporate Social Responsibility, with products and services that are also designed to exceed your performance expectations.

Here are just a few examples of what makes Chemstore stand out from the crowd:

Full design service

Find out how a tailor-made solution could work for you. Discuss your specific site requirements with us and we’ll engineer a bespoke proposal that slots right in with your needs.

Fast turnaround

Your deadlines are our priority. We manufacture to strict, in-house quality guidelines and can deliver to suit your deadlines. Plus, our experienced steel fabricators operate to the highest possible standards of excellence.

Quality you can count on

You’ll benefit from a 10 year structural guarantee on most products.

Firevault – Walk In Fire Rated Stores

Walk In Fire Rated Stores Stores

The FireVault storage module provides the highest level of safety instantly for the secure storage of all flammable materials. All areas of industry currently employ flammables in their processes from petroleum products to industrial chemicals.


Manufactured to the highest standards utilising only those fireproofing materials, which have been tested to BS 476, part 22, FireVault Stores comply with all relevant Health & Safety Regulations, Insurance requirements and environmental standards such as IS310, ISO 14001, EMAS and IPC licensing.


Standard features include, full width spillage collection sumps, up to 5 hour fire rated composite wall panels, insulated self-closing doors, intumescent ventilation panels, fixed shelving, anti-static grounding connections, fully welded, leak tested bunds, galvanized grid mesh floors. A range of optional extras are also available for the Firevault units including ex-rated electrical fittings.         


All Firevault units are delivered to site fully assembled and ready for immediate use. No special site works are required and at any future time, they can easily be relocated by forklift truck or crane, thereby offering excellent flexibility.
The most common Firevaults are the Walk In Stores used for small container storage (25L cans, Winchesters etc) and feature:

  • 1, 2 or 4 hour fire rated cladding fitted on all sides.
  • Firevaults are designed in accordance with EN–14470-1 European Regulations
  • Self-closing door mechanisms and internally overriding door locks fitted to all units
  • Fire-rated intumescent air vents fitted at high and low level to ensure excellent natural airflow
  • Fire rated door seals fitted throughout
  • Electrostatic management system installed to prevent static sparking from igniting flammable vapours
  • All electrical equipment fully ATEX rated and installed by a Compex certified engineer
  • Forced extraction system available
  • Constructed from fully welded steel box section throughout
  • Fully welded and leak tested bunding underneath floor level
  • Single or double access doors available
  • Fixed or adjustable shelving fitted
Firevault – Fire Rated Drum & IBC Store

Mat Mitchell spoke to us after receiving a bespoke Firevault – fire rated drum & ibc store on site in the UK .

“After consulting with various suppliers, Chemstore was the only company who could provide us with the required solution” Mat Mitchell Technology Supplies Ltd. – 

Fire Rated Stores for: Drums, IBC’s & pallets of flammable materials.

FireVault units are fully modular and can be easily relocated by forkturck or Hi-AB Crane

All Firevault units are delivered to site fully assembled and ready for immediate use with no site work required.
Firevault Multi Pallet Stores feature:

  • 1, 2 or 4 hour fire rated cladding fitted on all sides.
  • Firevaults are designed in accordance with EN, DIN & BS standards.
  • FireVault wall panels are tested to IMO FTP A60 standard
  • Self-closing door mechanisms and internally overriding door locks fitted to all units
  • Fire-rated intumescent air vents fitted at high and low level to ensure excellent natural airflow
  • Fire rated door seals fitted throughout
  • Electrostatic management system installed to prevent static sparking from igniting flammable vapours
  • All electrical equipment fully ATEX rated and installed by a Compex certified engineer.
  • Forced extraction systems available
  • Constructed from fully welded steel box section throughout
  • Fully welded and leak tested bunding underneath floor level
  • Single or double access doors available
  • Fixed or adjustable shelving fitted

See table below for our range of sizes below 

Firevault – Fire Rated Critical Equipment Enclosure

Fire Rated Critical Equipment Enclosure

With over 24 years experience in the design manufacture and implementation of safety storage systems for hazardous materials, We know from speaking to our clients that the most prevalent risk has always been in the storage of flammables. What also must be considered is the protection of valuable equipment. The Firevault can employed as a Fire rated critical equipment enclosure. Whether it be the HSE, EPA or even company insurers carrying out assessments on your site it will always be the risk of fire that is given the highest priority. The Firevault enables you to obtain the highest level of safety and protection when storing flammable materials or protecting your most valuable assets on on site.

Firevault units can be manufactured to suit bespoke site specific requirements.

  • Pallet stores
  • Walk In stores
  • Small container stores
  • Combination stores
  • Lighting
  • Heating
  • Power outlet sockets
  • Electrostatic management systems
  • Forced extraction systems
  • Extraction airflow alarms
  • Fire suppression systems
  • Smoke / fire detection systems
  • Fume scrubbing systems
Corvault – Pallet / IBC Stores

Features and Benefits:

  • Cladding: Profiled, single-skin cladding is fabricated from a Longlife Zintec based, corrosion resistant alloy which is then Plastisol coated.
  • 20-year cladding guarantee in normal conditions.
  • Construction: Robust all welded 100x50mm steel box section frame.2mm Welded steel doors.
  • Polyethylene sumps: to protect against corrosion/degredation from corrosive chemicals.
  • Floor/Shelving: Removable hot dipped galvanized grid mesh floor & shelving.
  • Finish: All steel coated with 2 pack anti-corrosive epoxy paint system. Choice of colours. Standard colour: Blue Ral 5017, Red RAL3020, Green RAL6029
  • Signage: Clear and bold “!” “Keep Door Closed When Not in Use” warning signs fitted as standard.

Standard features include, full width spillage collection sumps, fixed shelving, polyethylene sumps , fully welded, leak tested bunds, galvanized grid mesh floors.

 

A range of optional extras are also available for the Corvault units including lighting etc.

Temperature Controlled Stores

A very common problem our clients have is maintaining valuable liquids and and process chemicals within the correct temperature range for optimum safety and performance. Temperature Controlled Stores are the solution.

Valuable time is lost in waiting for chemicals to heated to performance temperatures and also product is fouled by exposure to incorrect temperatures.

Chemstore’s temperature controlled stores are stand-alone relocatable, insulated stores which are designed to provide secure, controlled storage for temperature sensitive materials. We offer a full range of sizes together with heating and cooling options. Depending on the hazardous material being stored by harnessing the SDS sheet Chemstore can provide the required storage temperature to alleviate any hazard presented by storing materials on site.

We also offer drum & IBC’s Enclosures designed to heat the contents of standard drums and IBC’s from freezing or ambient to your required processing temperature.

Features of Temperature Controlled Stores:

 

  • Full range of sizes and temperature ranges.
  • Full technical advice and Design Service: manufactured to customers specific requirements.
  • Fully adjustable. Set temperature band (e.g. 0–600C) or maximum/minimum allowable temperature.
  • LCD temperature display and printout.
  • High levels of insulation.
  • Audible alarm and beacon.
  • Full operator safety features.
  • Suitable for Indoor or Outdoor location.
  • Delivered to site fully assembled, minimal lead time.
  • Electric or steam heat source.
  • Internal re circulation fan ensures even distribution of heated air.
  • Explosion protected electrical apparatus (suitable for Zone 1 & 2).
  • Fully bunded.
  • Stainless steel or galvanised interior.

Hazvault – Walk In Bunded Store

 In all areas of industry there is an ever increasing need for adequate and compliant storage of hazardous materials even in small volumes. Employ a walk in bunded store when dealing with hazardous materials as it is important to ensure compliance with government legislation regarding pollution prevention,  fire risk and general safe practice.
 
For storage of non-palletised loads and smaller containers or as a bunded work room for decanting or weighing operations, we recommend our Bunded Walk In Stores.

Features of Hazvault – Walk In Bunded Store:

 

  • Fully bunded. Capacities in excess of EPA recommendations
  • Delivery to site fully assembled. Easily relocated
  • Range of standard sizes.
  • Can be manufactured to customer dimensions
  • Fully secure
  • Fixed or adjustable shelving
  • If required, double access doors can allow pallet to be placed in aisle
  • Choice of finishes, colour options
  • Fully ventilated, optional electrical extraction
  • Single skin or insulated construction
  • Optional lighting, heating etc.