GB 0208 704 1807
Gasvault – Gas Cylinder Stores

Chemstore’s range of Gas Cylinder Stores

The GasVault range of stores are specifically designed to provide a safe, ergonomic range of compliant storage solutions for gas cylinders.

The GasVault range addresses the following key safety issues:

  • Designed and manufactured in accordance with the BCGA (Guidance for the storage of Gas Cylinders in the workplace).
  • Full structural certification and a 10 year structural warranty available on a GasVault units.
  • All cylinders are stored upright and secured with chain restraints.
  • Open mesh panels are used to prevent accumulation of harmful / explosive gases.
  • Cylinders of incompatible gases can be stored in the same store by employing a fire rated segregation wall.
  • Empty cylinders can be segregated from full containers and are clearly labelled.
  • If stored externally, weather-proof roofing is required to protect cylinder fittings from rain water.
  • Raised flooring should also be used to protect cylinder from corrosive bases &  ground water erosion.

Features : Gas Cylinder Stores

  • Heavy duty steel construction
  • Option of sliding or hinged access doors – fully lockable.
  • Mesh gates and ventilation panels ensure adequate ventilation and prevent build-up of potentially explosive gas leaks.
  • Non-slip galvanised floor & ramp
  • Firewalls supplied where required
  • Full range of sizes to suit all cylinder sizes and applications
  • All units have fixed arms and retaining chains to prevent accidents and ensure maximum use of space
  • Delivered to site fully assembled
  • Units can easily be relocated with fork trucks
  • No site works are required
Cylinder Wall Racks

Poly Bumper Brackets

  • Spark resistant
  • Lightweight and easy to manoeuvre.
  • Rugged construction is durable and robust.
  • Will not rust or corrode under harsh weather conditions.
  • Chemical resistant to submersion / splashes.
  • Simple or double cylinder designs

Steel Wall Brackets

  • These racks must be fixed to the wall at a height of at least two-thirds of cylinder height.
  • Supplied with pre-drilled fixing holes (fixings not supplied).
  • All racks fitted with steel link retention chains.
  • Finish: Blue epoxy.
  • Racks can be designed to suit any number of cylinders.

Holder / Wall Braket – Cylinder

  • Strong wall fixingsteel frames to hold 2 gas cylinders securely and safely. They should be positioned to the wall at approx. half of cylinder height.

Cylinder Holders

  • Cylinder holder, stainless steel, for ‘D’ or ‘E’ (100mm dia.) cylinders. Supplied with loose support base for ‘D’ cylinders.
  • Cylinder holder, stainless steel, for ‘F’ (150mm dia.) cylinders.
Model
Special Notes
Dimentions (W x D x H)
Weight
CYB/DE2
For 2 x ‘D’ or ‘E’ cylinders
359 x 107 x 88 mm
1.1 Kg
CYB/F2
For 2 x ‘F’ cylinders
435 x 126 x 88 mm
1.4 Kg
CYB/G2
For 2 x ‘G’ cylinders
511 x 145 x 88 mm
1.65 Kg
CYB/J2
For 2 x ‘J’ cylinders
613 x 170 x 88 mm
2.1 Kg
Gas Cylinder Trolleys

Economy Gas Trolley

  • Single / double cylinder trolley with easy roll heavy duty wheel.
  • Safety chain in heavy duty steel.

Welders Trolley

  • For convenient use of 1 oxygen cylinder and 1 acetylene cylinder with rods and cable holders.
  • Steel link retaining chains fitted.
  • Wheels: 400mm dia. pneumatic or solid rubber tyred wheels with roller bearings.

Finish: Blue epoxy

Single / Dual Cylinder Dolly

  • Spark resistant.
  • Lightweight and easy to manoeuvre.
  • Rugged construction is durable and robust.
  • Will not rust or corrode under harsh weather conditions.
  • Chemical resistant to submersion / splashes.
  • 1 x ø300mm OR 2 x ø300mm cylinder capacities.
  • Pneumatic wheel option for external use or rough terrain.
  • Counterbalance design ensures minimal force is required for use.

12-Section Cylinder Trolley
Special trolley with 12 sections suitable for ‘D’ or ‘E’ cylinders, with non-slip rubber base board and push handle one end

Domicilary Cylinder Trolley
Light duty trolley for home care use. to hold the ‘AF’ gas culinders distributed by chemists.
The cylinder is held securely in place by the recessed base plate, and a captive chain.
The hook attached to the handle allows safe stowage of face mask and tubing

Cylinder Lifting Cradles

Cylinder cradles are designed for use with overhead lifting gear.

  • For use with forktruck / overhead lifting gear.
  • Robust all welded steel construction.
  • Top & bottom cylinder chain restraints.
  • ø180 – ø305mm cylinders
Free-Standing Cylinder Racks

2-6 Pack Poly Cylinder Racks

Maximise floor space while eliminating clutter and safety hazards by properly storing your industrial cylinders. Efficiently sized to easily move through standard doorways. Forkliftable! Handles cylinders 3″ to 10″ diameter. Optional accessory strap can be added to bottom for extra security.

  • Spark resistant.
  • Lightweight and easy to manoeuvre.
  • Rugged construction is durable and robust.
  • Will not rust or corrode under harsh weather conditions.

Chemical resistant to submersion / splashes.

Steel Cylinder Racks

  • Single or double sided for 2, 3, 4 or 6 cylinders.
  • Single sided units have rear frames pre-drilled. We strongly recommend that single sided units are fixed to the wall.
  • Fully welded construction throughout.
  • Steel link retention chains fitted.
  • Finish: Blue epoxy.
Cylinder Lifting Trolleys

Combined cylinder trolley / lifting cradle

One product allowing cylinders to be moved with either overhead lifting gear, or wheeled into position.

  • For use with forktruck / overhead lifting gear.
  • Robust all welded steel construction.
  • Top & bottom cylinder chain restraints.
  • ø180 – ø305mm cylinders