GB 0208 704 1807
Manual Pumps

SC20

  • For all petroleum products and oil grades
  • Rotary action
  • Cast iron construction
  • 20 litres per minute
  • 1250 mm delivery hose
  • High Quality

PR9

  • For aggressive chemicals e.g chlorinated solvents, caustics etc. Inks
  • Reversable rotary action
  • Ryton construction
  • Viton seals
  • Teflon gaskets

SS3

  • For aggressive chemicals, solvents, de-greasers etc.
  • Lift action
  • Stainless steel construction
  • Teflon seals
  • 0.65 Litre/Stroke
  • 3/4 outlet spout

PP9

  • For water based acid solutions, alkalis, salts and petroleum products
  • Reversable rotary action
  • Polypropylene construction
  • Viton seals
  • Polyethylene gaskets
Forklift Attachments

Grab-O-Matic 1-DLR
Single parrot beak drum handler
Fork attachment single drum handler which grips the rim on drums of various diameters & sizes, damaged or new.

Features: The Grab-O-Matic 1-DLR can be quickly and easily converted to a 2-DLR (2 drum handler) by moving the pillars to one side of the long reach frame and adding a pillar and gripping head to the vacant side, there is also height adjustment up and down the pillar for small drums. The gripping heads are interchangeable so special heads can be exchanged such as the SS/AL head for mauser drums.

Optional Extras: Rubber Fender at the base of the pillar for drum protection model 1-DLR-P

Note: Specials can be made to suit larger fork sizes

Grab-O-Matic 2-DLR
Double rim gripping (parrot beak) drum handler

Fork attachment double drum handler rim gripping unit for drums of various diameters and sizes, damaged or new drums.

Features: The Grab-O-Matic 2-DLR can be quickly and easily converted to a 1-DLR by removing the pillars and placing a single pillar and head in the centre of the frame, there is also height adjustment up and down the pillar for small drums. The gripping heads are interchangeable so special heads can be exchanged such as the SS/AL head for mauser drums.

Optional Extras: Rubber Fenders at the base of the pillar for drum protection model 2-DLR-P

Note: Specials can be made to suit larger fork sizes.

Grab-O-Matic DH-1
Single Drum Handler

Fork attachment single drum handler waist gripping unit for steel drums with pronounced rolling rims and consistant diameter

Note: Specials can be made to suit larger fork sizesand/or different size drums POA

Grab-O-Matic DH-2
Double drum handler

Fork attachment double drum handler waist gripping unit for steel drums with pronounced rolling rims and consistant diameter

Note: Specials can be made to suit larger fork sizes and/or different size drums POA

Drum Funnels

Universal Poly-Drum Funnel, Part No. 3004-YE

Fits both closed-head and open-head 55-gallon drums, and other containers. Just set it and forget it. Exclusive features include patented scalloped design, high side wall and bung fitting holders. Add the optional cover for more value!

Universal Poly-Drum Safety Funnel, Part No. 3004-YE-SF

All the same features as the Universal Poly-Drum Funnel plus a non-sparking safety bung closure with flame arrestor. Ideal for flammable liquids.

Universal Poly-Drum Funnel Cover, Part No. 3040-YE

Optional lockable cover (lock not included) for use with Part No. 3004-YE and 3004-YE-SF. A snap to install with all necessary hardware and instructions included.

Drum Vents

Drum vent 125

  • Ideal for use in conjunction with 3/4″ drum tap
  • Brass Construction
  • 2″ BSP
  • Nitrile seal
  • Vent aperture can be closed if required
Drum Top Workstation

The Drum Top Workstation can lead to a major improvement in housekeeping, saving liquid normally lost or wasted during the dispensing process by returning it back to the drum clean and free from debris, while keeping the drum head clean.

The Drum Top Workstation fits tight head drums and works with all types of rotary drum pumps.

Made of durable non-corrosive and chemically resistant polyethylene, it has an angled surface and it is fitted with a stainless steel mesh strainer, allowing spilt liquid to flow back into the drum free from debris.

Drum Heating Stores

Chemstore supply Drum Heating Stores which are individually manufactured to provide insulated optimum storage conditions

Chemstore supply a full range of drum / IBC heating stores. Main features include:

  • Operating temperature – 0 – 150 oC
  • Extremely low heat loss – 100 mm mineral wool insulation – structure without thermal bridges – fibreglass gaskets.
  • Minimum heating time – high air turbolence – high air / drum exchange rate – heat-up time for drums containing holding mineral oil ?T = 50 oC in 3 – 4 hours
  • Heating methods available – electrical, steam, diathermic oil, hot water, gas
  • Construction – carbon steel framework with sheet metal panels, galvanised steel interior, painted steel exterior.
  • Safety – double thermoregulation, doors can be opened from the inside, door-lock microswitch, IP 55 protection, alarm lamp
  • Optionals – stainless steel construction, grid base, overflow collection trays, roller base, EEX-d version (Atex), protective top cover for external location

Electric Heaters for Single Drums
Chemstore Engineering also supply a full range of electric single drum heaters.

  • These can be designed to suit the client’s exact specifications.
  • Base heaters can be used in conjunction with the standard heater to achieve higher temperatures.
  • Explosion-proof drum heaters are also available

Induction Heater

Melts Solids – Heats Liquids – Totally Safe

Designed to heat 205 litre drums or smaller steel vessels.
Thermosafe is an alternative to multi-drum ovens and the solution to a host of process heating problems, even in hazardous areas.

Thermosafe is a single induction coil, wholly encapsulated in a cylinder made from a glass reinforced resin specifically developed for chemical plant. The cylinder is simply placed over the drum. Contact is not required.

The coil is connected to a single phase AC mains supply and generates heat directly and uniformly in the drum wall. Energy transfer is by alternating magnetic field. As there are no hot elements, the heater remains substantially cooler than the drum being heated.

  • Maintenance Free GRP Construction, no heating elements or moving parts.
  • Lightweight – 50 Kgs, can easily be lowered over drum. Lifting / handling equipment can be fixed to flanges.
  • Typical heating times: 15 oC per hour for viscous organic liquid.
  • Protection to IP65.
  • Hazardous areas – suitable for use in zones 1 & 2. (EE x e II 170 oC -T3-)
  • Can be stacked for tall vessels or cylinders.
  • Minimal retained heat in drum heater enables close temperature control with on/off devices (optional control panels available)
  • Height: 711mm; Internal diameter: 613mm; External diameter 743mm
  • Weight: 48 Kgs
  • upplied with 5m galvanised steel wire braided cable.

Supply: 240V, 50Hz AC
Current / Power Consumption: Switch on – 21A/2750W – Running – 18A/2250W

Heating Jackets

Heating Jackets for Drums & IBCS

  • Flexible heating jackets in a range of sizes to suit 25L-200L drums and 1000L IBC’s
  • Adjustable or fixed thermostat control
  • 240V & 110V options
  • Supplied in sizes & power ratings to suit particular applications (contact our Sales Dept. for advice)Explosion-proof drum heaters are also available
Electric Pumps

Oil / Fuel Pumps

Chemstore Environmental supplies a full range of oil / fuel pumps.

W30 – Light Duty Electric Drum Pump

  • Electrically operated 220/240 volt AC
  • Plastic construction
  • Threaded 2″ BSP fitting suits 200 litre drums
  • Delivers 30 litres per minute (max.)
  • Suitable for diesel, paraffin and very light oils only (NOT for use with petrol)
  • Comes complete with riser hose to be cut to desired length and inlet strainer
  • 2 metres delivery hose and trigger nozzle
  • Weight 3 kg

G30
Same as W30 but with 12V DC for use with battery.
.
W40

  • Electrically operated 220 / 240 V AC
  • Plastic construction
  • Threaded 2″ BSP
  • 40 litres per minute (max.)
  • Suitable for diesel, paraffin and very light oils only with flash point above +55 oC
  • Comes complete with riser hose to be cut to desired length and inlet strainer
  • 4 metres delivery hose and trigger nozzle
  • Weight 4.2 kg

W40F
As W40 but with electronic flowmeter.

W80

  • Electrically operated 220 / 240 V AC
  • Threaded 2″ bsp
  • Capacity 80 litres per minute
  • For diesel & light oils only with flash point above +55 oC
  • 4 metres delivery hose with auto shut-off nozzle
  • Foot filter included
  • Weight 19.5 kg

W80F
As W80 but with electronic flowmeter

Wall Mounted Electric Pump, Nozzle & Flowmetre

  • 345mm x 345mm steel mounting plate
  • Flowmeter with filters
  • 4 metres delivery hose
  • Trigger nozzle
  • Nozzle retainer
  • Delivers 40 litres per minute
  • Suitable for oil and diesel
  • Weight 22 kg

V70 – Heavy Duty Electric Drum Pump

  • Electrically operated 220/240 volt AC
  • Metal construction
  • Flange mounted
  • 30 litres per minute
  • Heavy duty – suitable for all grades of oil, waste oil, etc (NOT for use with petrol)
  • 3/4″ BSP inlet & outlet
  • Can be wall mounted permanently or used portable
  • Hoses and wall mounting bracket supplied as optional extras
  • Weight 14 kg
  • 2m Head

 


 

Chemical Pumps

Chemstore Engineering supplies a complete range of electrical or air-powered pumps agitators, flowmeters and accessories.

Different drum pump sets are available for:

  • acids
  • glycols
  • alkalis
  • mineral oils
  • hydrocarbons
  • highly flammable liquids
  • other hazardous fluids

 

Drum Cradles
  • For 200L Steel Drums
  • Allows controlled pouring of drum contents
  • Easy for one person to use
Drum Trolleys

Drum Trolleys | Drum Palletisers

Dispensing Drum Trolleys

STS Safety Drum Trolley
Lifts 300 kg Drums with only 20 kg input force. Reduces injuries.
The Stainless Steel STS Drum Trolley uses the Patented STS System to enable a single operator to lift, transport and de-palletise all drums up to 210L within the Manual Handling Operations Regulations 1992. It allows drums to be handled in areas where forklifts are not cost effective or represent a safety hazard.

  • Satisfies H & S manual lifting regulations, minimum effort required to lift drums
  • High quality stainless steel finish
  • Robust design

Chime Model

  • Grips all lip-type steel & poly drums. (150-200Litre)
  • Stainless Steel Construction
  • 75 mm drum ground clearance, 300m diameter wheels

200L Drum Trolleys

Heavy Duty Drum Truck
Suitable for all 200L drum types (please state drum type when ordering)
Optional 4 wheel design to support the weight of the drum
Powder coated paint finish
Optional Zinc Galvanised Finish
Dimension: (W)740 x (H)1520mm
Capacity: 350 kgs

Drum Palletising

Drum Palletiser

  • Heavy duty 4 wheel design enables quick and easy loading & unloading of 200 Litre drums from standard pallets
  • Suits all Drum types (please state drum type when ordering)
  • 350 kg capacity
  • Dims: 610 x 1550mm
  • ULW: 36 kgs

Ergonomic Drum Palletiser – Model DM 1100

  • Hydraulic lifter for all lipped steel & poly 200 L drums
  • Drums can be lifted 500 mm above floor to place them on corners of spill pallets, scales, etc
  • Swivel castors / floor lock
  • Capacity: 500 kgs
  • Dims: (L)950 x (W)1030 x (H)1225 mm
  • ULW: 160 kgs

Counterbalanced Drum Stacker

  • Designed to lift, transport & stack 210 litre drums
  • Range of attachments enable all 200 litre plastic & steel drum types to be lifted (please state drum type when ordering)
  • Drums can be stacked on pallets & weighing scales up to 340mm high.
  • Capacity – 300 kgs
  • Wheels: 200mm diameter front – nylon. 150mm diameter rear swivel – nylon
  • Hydraulic hand pump operation