GB 0208 704 1807

Model: 24DSD-S Firevault – 6 Pallet Store

Model: 24DSD-S Firevault – 6 Pallet Store

 24DSD-S Firevault - 6 Pallet Store 224DSD-S Firevault - 6 Pallet Store

Storage:

6 pallets, 24x200L drums or 6x1000L IBC’s stored on two levels.

Overall dimensions:       

(W) 4500mm x (D) 1900mm x (H) 3350mm

Construction:  

Robust all welded 100x50mm steel box section frame

Sumps: 

 

Non-combustible, corrosion resistant coated steel sumps fitted under floor level, capacity 1,200L (exceeds current EPA guidelines which state that the bund capacity should be a minimum of 25% of the total volume of liquids to be stored).
Bund Test Certificates are also issued for every unit.

 

Shelving:

 

Shelving constructed from parallel, 50x50mm box section steel, fully welded.

 

Access:

Three, heavy-duty sliding access doors, fully padlockable

Lifting: 

Robust all welded 100x50mm steel box section frame.

Ventilation 

4 no. intumescent ventilation Pyrogrilles fitted as standard at high and low level to ensure good ventilation throughout the store. When tested to BS 476 part 22 the panels exhibit a 1hour fire-rating.

Sealing:

 

Full door, intumescent, elastomeric, neoprene based seal are installed where possible, to protect the Firevault and its contents from the spread of flame and heat. All seals have self-extinguishing properties in fire and are not affected by toxic fumes, dust, or weather conditions. A polypropylene brush with central blade is also incorporated to act as weather, draught and smoke excluder. Tested to BS476/31.1

Wall Cladding:

 

The 100mm thick Fire-rated panels are fabricated from high quality resin bonded Conrock slab and are securely fixed using the tongue and groove method, for added stability, to the robust welded steel box framework. The internal face is finished with polyester coated internal zinc steel panels. When tested in accordance with BS 476 part 22 1987 the panels exhibit the following results: Resistance to the passage of flames 110 mins.Insulation on temperature 80 mins.Stability >110 minsThere is, therefore fire resistance to the wall construction of 80 mins.

Roof Cladding:

 

In accordance with Health & Safety Guidance Notes HS(G)51, which states that: –“External storage buildings, whether or not they are fire-resisting structures, should have a light-weight roof to        act as explosion relief.”  The profiled, single skin roof cladding is therefore designed to be of a notably lighter construction than that of the wall and door panels. 

Finish:

 

Framework: All steel coated with 2 pack anti corrosive polyurethane paint system. Choice of colours.  Standard colour: Red RAL 3020.
External: Long life, maintenance free Plastisol (PVC) finish on wall panels. Choice of colours.
Standard colour: Goosewing Grey.
Internal: White chemical resistant Stelvetite (PVC) finish on internal walls.

Signage:

 

Clear and bold “Firevault”, “Flammable, No Smoking, No Naked Light” and “Keep Door Closed When Not In Use” signs fitted as standard.